Barka da zuwa ZIBO YUNFENG masana'antu CERAMICS CO., LTD

606 / 400L-nailan abu mai daidaitaccen mai tsabta a cikin tsirar takarda

Short Bayani:

Aikace-aikacen mai tsafta mai yawa Wannan masu saka hannun jari mafi kyawun kayan kwalliyar takarda, kayan kwalliyar kwalliya nau'ikan kayan aiki ne wanda ake amfani da shi don cire dattin dusar kankara na minti, kumfa, filastik da sauransu a cikin aikin kera takarda. An yadu amfani da sake yin fa'ida ɓangaren litattafan almara yin da kwai tire samar line. Sabon nau'in Mai tsabtace tsabtace YF Mai Tsabtace Tsabtace Mafiya yawanci ana amfani dashi don cire ƙazamar ƙazanta kamar tsakuwa, baƙin ƙarfe, ƙura da manyan ƙwayoyin tawada daga d ...


  • yumbu: 92% / 95% 97% 99% alumina & ZTA
  • sus304: 0Cr18Ni9
  • Bayanin Samfura

    Alamar samfur

    Aikace-aikacen tsabtace ƙasa mai yawa

    Wannan Injinin mafi kyawun zabi na katako mai dauke da takarda, mai tsabtace bagade shine nau'ikan kayan aikin pampo wanda ake amfani dashi don cire dattin dusar kankara na minti, kumfa, filastik da sauransu a cikin aikin kera takarda. An yadu amfani da sake yin fa'ida ɓangaren litattafan almara yin da kwai tire samar line.

    Sabon iri

    Tataccen mai tsafta

    YF mai tsabtace tsabtace tsabta an fi amfani dashi don cire ƙazantar ƙazanta kamar tsakuwa, baƙin ƙarfe, ƙura da manyan ƙwayoyin tawada daga nau'ikan ɓangaren litattafai daban-daban.Mutanan da ke gudana mafi daidaituwa na iya isa 2%, rage asarar fiber, haɓaka ƙarfin samarwa, rage abubuwan da ake buƙata da lambobi na masu tsafta.High tsaftacewa mai tsafta, wanda ke kauce wa tarawar abun cikin ash a ɓangarorin ƙarshe. Babban amincin aiki, ba za'a toshe shi ba.

    Rubuta YF400 / 600
    Capacityarfin wucewar kayan aiki ɗaya (l / min) 400-480
    Max zazzabi mai aiki (ºC) 70
    Max matsin lamba (Mpa) 0.4
    Daidaitawar shigarwa (%) ≤2%
    Wankan ruwa yana kwarara 20-60l / min

    Za a iya amfani da jerin YF600 mai saurin ingancin kayan aikin slag a cikin kowane irin ɓangaren litattafan almara don tsabtace ragowar lafiya da rabuwa, nau'ikan kayan aikin pulping ne wanda ya dace da canjin fasaha na farkon zaɓin kayan aikin slag.
    Ka'ida da tsarin YF600 nau'in slag remover

    Siffofin fasali

    1. Tsarin tsaga
    Mai tsabta don tsaran tsari, ana iya raba dukkan Mai tsabtace zuwa sassan 3-4, mai sauƙin kwance da maye gurbin su.
    2, hanyoyi daban-daban na fitowar slag
    Dangane da buƙatu daban-daban na masu amfani don zaɓar hanyoyi daban-daban na fitowar slag, don daidaitawa da yanayin aikin mai amfani.
    3, bakin yumbu mai jurewa mai ɗorewa
    Partananan ɓangaren mazugi na slag SEPARATOR ya ɗauki bututun yumbu lalacewa mai tsayayya, wanda ba kawai yana tabbatar da daidaitaccen fitowar fitowar slag ba amma kuma yana tsawanta rayuwar sabis.
    Kamfanin bisa ga hanyar slag daban da bukatun mabukaci don samar da nau'ikan daban-daban, bayanai dalla-dalla na bakin slagging yumbu.
    4. Kowane slurry bututu an haɗa shi da tiyo na reshen slagger, kuma an sanye shi da bawul don sauƙaƙa sauƙin amfani da dukkan tsarin zuwa slagger guda.
    5. Babu sassan motsi, tsayayye kuma abin dogaro aiki.

    Fasali

    Hannun halaye na musamman sun sanya mai tsabtace nauyi yana da halaye masu zuwa:
    1, na iya cire slurry a cikin yashi, tsakuwa, waya ta ƙarfe da sauran ƙazaman ƙazanta;
    2, ƙara adadin da ƙarin ƙarfin slag, gwargwadon rage asarar zare;
    3. Barga aiki.
    Yayin aiki, zai iya samar da tsayayyen samfurin ruwa, wanda zai iya ingantaccen ci gaba da cire ƙazanta.
    4. Mahimmanci slurry ceto sakamako.


  • Na Baya:
  • Na gaba: