Barka da zuwa ZIBO YUNFENG masana'antu CERAMICS CO., LTD

95% Bututun Yumbu da bututun ƙarfe kai tsaye an yi su ne daga Masana'antar China

Short Bayani:

* Enauki yankin aikace-aikacen: Yankunan aikace-aikacen: Mai, hakar ma'adinai, injinan ƙarfe, tsire-tsire masu ƙarfi da sauran masana'antu a saman kayan aiki ko kayan da ke isar da ruwa mai gudana ta cikin kayan da ke jure bututu, babban sakamako yana magance tasirin tasirin. tasirin kayan bango suka wuce. * Samfurin fasalulluka: pressingwanƙwasa maɓallin bushewa, zazzabi mai ƙarfi, taurin Rockwell HR80-90, na biyu kawai zuwa lu'u-lu'u Batutuwa da ke buƙatar kulawa don sufuri da shigar da yumbu ...


  • yumbu: 92% / 95% 97% 99% alumina & ZTA
  • sus304: 0Cr18Ni9
  • Bayanin Samfura

    Alamar samfur

    * An ɗauki yankin aikace-aikacen: Yankunan aikace-aikacen:

    Man fetur, ma'adinai, injinan ƙarfe, tsire-tsire masu ƙarfi da sauran masana'antu a saman kayan aiki ko kayan da ke isar da ruwa mai gudana ta cikin kayan da ke jure bututu, babban sakamako yana magance tasirin tasirin kayan bangon da aka wuce.

    * Kayan samfur:

    Ryaƙasasshen busassun bushewa, zazzabi mai ƙarfi, ƙwarfin Rockwell HR80-90, na biyu kawai ga lu'u-lu'u.

    Batutuwa da ke buƙatar kulawa don sufuri da shigar da bututun yumbu
    1. Bututun yumbu mai hade yana da tauri mai ƙarfi da kyau, amma ya kamata a sanya shi a hankali yayin aiwatar da sufuri da shigarwa don kauce wa haɗari mai haɗari, musamman don kauce wa hulɗa kai tsaye da kayan ƙarfe ko tasiri a kan yumbu a ƙarshen ƙasa.
    2. An shigar da bututun lanfeng lankwasawa tare da kai tsaye. Lokacin da aka shigar da bututun lankwasawa, alkiblar da kibiya ke nunawa a saman bututun lankwasawa ya kamata ya zama daidai da hanyar kwararar mahimmin sako.
    3. Lokacin shigar da bututun, yakamata a daidaita bututun tare da layin tsakiya kuma ya kamata a daidaita matakin don tabbatar da cewa duka ƙare biyu sun haɗu daidai.Ya kamata a sarrafa ƙaurawar ƙarshen duka cikin 1.0mm.
    4. Lokacin da ake amfani da hadin bututu mai sassauci don hadawa da sanya bututun, za a daidaita tsayin da aka saka na duka karshen na murfin bututun mai sassauci daidai gwargwadon hali.Since da karin fadada zafin jiki na bututun hadedde yana da kusan 1/3 na na karfe , Ana iya rage izinin fadada ta hanyar 3-5mm.
    5. Lokacin amfani da haɗin flange, ƙarshen flange zai kasance tare da ƙarshen bututun da aka haɗa.
    6. Saboda kyakkyawan aikin walda na bututun hadedde, ana iya gudanar da haɗin bututun ta waldi. Koyaya, lokacin waldi, 45o-60o "V" nau'in gangaren Angle shine 2-4mm kuma ratar 0.8-1.2mm.


  • Na Baya:
  • Na gaba: